Green bathroom tile grout. How to choose grout color for bathroom tiles

When you have successfully coped with or on the floor, it's time to start grouting the joints between the tiles, and for this, first of all, you need to figure it out how to choose grout for tiles not only in color, but also in quality. Since in the end, tile grout can both decorate the painstaking work done, and, conversely, ruin everything

How to choose grout color for tiles

Let's start with the aesthetic side of the question, how to choose the color of grout for tiles, so that its appearance, along with beautifully laid tiles, pleases the eye every day for at least one or two five-year periods. We recommend that you do not rush to buy grout along with tiles at the same time. Even if yours is fully approved, your decision about the color of the grout may change when you see your tiles firsthand on the walls.

So it was with us. Initially, our toilet was planned to have a light beige grout that matches the shades of yellow tiles and borders on the walls. Good thing we didn't buy it right away! Since, after the final laying of the tiles, we decided to choose a light mint grout color for the walls and dark green for the floor. It was these colors that looked most advantageous on our tiles.

How to choose a grout color for tiles - basic principles

The color of the grout, when used skillfully, can hide some of the roughness, enhance the perception of the big picture and enhance the beauty of the tile. It should only be remembered that no grout will save a carelessly and carelessly laid tile. On the contrary, it will indicate the curvature of the master.

1. You can choose a contrasting, in relation to the tile, grout only subject to exemplary tile laying, otherwise all the roughness will become visible at a glance! If your tile joints are perfectly even and you have always dreamed of a contrast grout, then remember:

• the combination of dark tiles with light grout looks better, and not vice versa
• if you are both dark and light shades for your bathroom or toilet, then stop at the grout to match the shade of your lightest tile;
• of the color contrasts, the most popular are green with white, blue with yellow, blue with white, chocolate with sand or beige, gray with pink, green with yellow, lilac with white, red with yellow, red with white;
• the color on a small sample ALWAYS looks lighter than on a large area.

2. In other cases, we do not recommend contacting contrasting grouts. It is best to choose a grout color that is close to the base color of the tile or slightly lighter - unless your tile is very dark. Or take the grout a little darker, if the tile itself is dark enough.

3. After you, looking at your walls in the bathroom or toilet, decide in which direction you need to choose the color of the grout and go shopping, then do not be lazy and take a few samples of tiles or their trimmings with you to make sure on the spot their compatibility with the selected grouts and the correctness of your decision. Since, for example, only the range of beige or sand grouts includes about ten shades, the green range also contains at least 12 colors. What shade fit better just your tile, you can’t immediately say.

4. Today there is no problem to buy a grout of almost any shade, so this approach deserves attention: for each tone of the tile, the corresponding grout. Or vice versa - inverse color replacement, that is, we apply grout for tiles of an adjacent color and get an interesting picture, not forgetting that this method is good only for exemplary tile laying.

5. There is another original approach - choose the color of the grout to match the color of the accessories. For example, all tiles are in creamy white tones and yellow-gold grout, which is combined with sanitary ware, accessories and furniture stylized in gold.

For our bathroom, we chose three tones of tiles: light beige - the colors of weak coffee with cream, shortbread and pure coffee without milk. The choice turned out to be obvious - the color of the grout is closer to sand. It's good when all three tones of the tile are in the same spectrum, like ours - all brown-beige shades. And if there are not two flowers, but three? Here again, by the way, the main principle applies: do not rush to buy grout, look at the finished walls and floor, and only after that choose the grout for the tiles.

Which grout manufacturer to choose

During ours, we had to work with the most advertised Ceresit grouts, and with lesser-known Atlas grouts. From our own experience, we can say that the result of the work, by eye, is not much different. Differences appear in the process of working with the material. Less time was spent mixing the Atlas mix and grouting was easier. The seam at Atlas turns out, although not glossy, but looks uniform on all surfaces. When interacting with water, Atlas is stronger than Ceresit changes color. The Ceresit grout joint in some places had a more glossy surface, and in some places a rougher one, but it was easier to wash off the tiles during grouting.

In general, the differences between grouts are not very noticeable and are very subjective. And for the price, Atlas only slightly outperforms its more publicized competitor. True, the color palette of Ceresit grouts is much richer than Atlas, but at Atlas we found the ideal grout color for us, which Ceresit did not have. Therefore, when choosing a grout, you should not look hard at the manufacturer, the main thing is to pay attention to the expiration date of the mixture, and also carefully follow the instructions and application technology. Read on: how to properly grout tiles.

Often in the process of construction work, questions arise that may seem insignificant at first glance. For example, the choice of grout for joints between tiles. It seems that the choice is obvious. For dark tiles, choose black or gray shades; for warm or white tiles, light-colored grout is taken. This technique is not always correct. In the installation, various grouts for tiles are used. How to choose a color and not harm the appearance of the tile - this is the main task that the master faces.

Contrast or monotone performance

Previously, to finish the seams of tiles, a grout was used that was most suitable for the shade of the tile itself. This is a rational and practical solution. However, now many masters are moving towards experiments with the color of the grout. Often its shade contrasts with the main tone of the tile, which greatly enlivens the walls or floor of the tile. The coating begins to play in a new way and looks fresh and interesting.

Many tile sellers are ready to offer already turnkey solutions for complex finishing of a covering by a tile. Together with the tiles, a grout with an already selected color scheme is offered.

Harmonious combinations

You can often find color combinations that come from real life or are pre-selected and tested by designers in different countries. Among the most striking are the following:

1. For tiles with a black or dark shade, pearl white or golden grout is selected. It effectively highlights the main dark shade and gives the room a touch of luxury.
2. Beige tiles contrast well with dark brown shades. This combination can be compared with the well-known contrast of coffee and milk.
3. Graphite-colored grout works well for pale green or olive tiles.
4. Mahogany shade grout is selected for gray tiles.

For white tiles, almost any tile grout is suitable. How to choose a color for this solution and not get upset at the end of the repair? In this case, it is worth choosing the color of the grout with an eye on other elements of the interior. It can be the main color of furniture or sanitary ware.

Of course, you can simply putty the seams with white grout, this will be the easiest and most rational option. But this color solution requires more careful care of the seams, since White color will constantly collect on itself a lot of dirt.

Colorless grout

Some craftsmen believe that colorless grout is a white material. Indeed, in the past, white grout was often used for any tile. It was well suited for light tiles, but gave a strong contrast on darker shades of tiles. This combination does not always look appropriate on modern tiles, especially on tiles with a textured pattern.

Now the market sells grout, which literally has a transparent base. It contains epoxy resins and glass. Due to this, the surface of the seam becomes transparent, and the material itself can withstand mechanical stress and is not afraid of mold and mildew. This grout is most often used to create decorative panels or mosaic walls.

What to look for when choosing a grout

The choice of grout for tiles is best done in conjunction with the purchase of tiles. This will allow you to experiment with different shades right in the store, without fear of making a poor-quality installation at home. To select the desired color of the material, you can use practical tips:

1. When choosing multi-colored tiles, they rely on the size of the room. If the room is small, choose a shade that matches the lighter part of the tile. To place a larger area, choose a color based on the tone of a dark tile.
2. One color tiles. In this case, it is necessary to decide what will be a more important factor - interior details or the tile itself. When the emphasis is on the tile, a grout is selected that contrasts with the main color of the tile. To highlight furniture or sanitary ware, they take a grout of the same tone with tiles.
3. Mosaic grout. For this type of finish, colorless grout is best suited. It perfectly masks the seams and does not allow fungi and mold to spread in them. For budget repair options, grout is used in a neutral or white shade. Also select the color that will most fall into the main tone of the mosaic.

(it is also called "fugue") - a mixture based on polymers or cement, which protects joints and seams from moisture, mold, debris, dust, helps to smooth out certain defects in the finish, and gives the integrity of the entire surface. Without grout appearance the walls on which the tiles were laid are unlikely to suit demanding owners - the adhesive mortar and cement between the tiles looks unattractive. Grouting also allows you to give the decor real aesthetics and expressiveness.

Choosing the color of grout for bathroom tiles is an important task, the wrong decision here can ruin the finish. WonderVanna will tell you how to choose the color of grout for tiles.

The content of the article: 1. 2. 3. 4. 5. 6.

How to choose grout for tiles by color? Traditional Options

First of all, those who are engaged in such a selection should pay attention to the traditional palette of grouts, consisting of the most popular colors:

• white;

• red;

• blue;

• green;

• blue;

• orange;

• black;

• violet.

This palette can be called standard. Of course, some large grout manufacturers can offer much more advanced palettes, in which there can be several dozen shades.

The traditional option is when the grout is selected in the same color as the tile or a close, similar color. That is, say, for dark brown tiles it is important to use chocolate or beige grout.

Another classic, win-win solution is to opt for white grout. It more or less matches any tile color. But this does not apply to gender. Here, the white grout will quickly lose its marketable appearance and acquire a dirty gray tint.

White color will emphasize each individual tile, outline its boundaries. If the tile itself is white, then the result will be a kind of monolithic space, which is also quite pleasant for contemplation.

Also white grout is the best choice, when tiles of several different colors are used in the design of the bathroom, and which one to focus on remains unclear.

How to choose a tile grout color to create contrast?

Another, more complex (requiring a certain taste and aesthetic sense) option is a game of contrast. If you have a penchant for experimentation and bright solutions, it is worth trying to combine several dissimilar tones in the interior. Moreover, today the contrasts in the interior are at the height of fashion.

For example, the Itten circle will help you choose the right combination of tile and grout colors, in which contrasting pairs of colors are presented as clearly as possible. It is on these pairs that you should be guided when choosing a color.

There is another intuitive rule: light tones contrast with dark ones. Here are a few specific examples: the contrast color for red will be green, for orange - blue, for yellow - lilac, for light green - pink, for gray - purple. Here, however, it is worth remembering that the light fugue, as it were, collects the entire canvas of the wall together, and the dark one breaks it into small pieces and fragments. In addition, our vision is arranged in such a way that light elements always seem to be pushed forward compared to dark ones, even if they are on the same line. And the dark elements seem to be located a little further, in depth.

Experienced designers know that sometimes completely incongruous tones can give a good result. On the other hand, a fugue of a color that a person considers a contrasting tile may end up looking awkward and ridiculous.

By the way, the contrasting option will be especially appropriate if the tile has a rather non-standard shape or a very bright color that you want to emphasize.

Grout for white tiles

Some of the most popular tile colors that are chosen for bathroom and bathroom decoration are still white and black. Bathrooms in this style can be seen both in residential apartments and in public spaces (for example, in clubs, theaters, cafes, restaurants, etc.).

If it was chosen white tile, there are a lot of possible grout colors. As already mentioned, white goes well with almost any other color. And an absolutely stunning contrast can be obtained if you pick up black grout to a white tile. But at the same time, the tiles must be laid perfectly, otherwise even the smallest flaws in the lining will be very noticeable.

Here you can not pay attention to the tiles at all, pick up the grout to match the accessories. If, for example, the curtain in the bathroom, towels, soap dishes are orange, then this color should also be chosen for grouting.

Grout for black tiles

For black tiles, approximately the same rules apply as for white. This is due to the fact that both colors are achromatic, which means that they can be combined with all others without problems. Black tiles looks great in combination with mother-of-pearl, red and yellow grout.

You can pick up such a tile and grout in black. But here you have to be careful. It is noted that this solution is poorly suited for small spaces. As a result, it will look even smaller - it will be uncomfortable here. And there are also cases when the black grout in practice looks dark gray, which does not give the result that the buyer was counting on. That is, black grout should be really black.

Color palettes from renowned tile grout manufacturers

To choose the color of the grout for the tile, the palettes available in every hardware store will help. You can approach such a palette with a selected tile sample and, applying it to a particular color, evaluate their compatibility.

Ceresit grout color palette

Atlas grout color palette

Grout colors Ultracolor plus (Mapei)

Grout colors Litokol

Unis grout colors

A good piece of advice for potential fugue buyers is to go to a store with a tile sample. And then at home, grout not the entire surface area, but only a small area that is in an inconspicuous place. The fact is that the grout can be sold both in dry form and in the form of a ready-made solution. And after drying, it may slightly change its shade.

Note that when choosing in a store, you should think about other parameters, in addition to color - manufacturer, type, cost, etc. Consultation with a sales assistant will not be superfluous here.

Of course, over time, even very high-quality grout can lose its original appearance. But here special seam paints can come to the rescue. In the end, you can walk on the tiled surface and a completely new grout - this will significantly refresh the interior. That is, grouting can be an inexpensive way to bring something new into an environment that has not changed for a long time.

When carrying out facing works, ceramic tiles are often used. Anyone who has ever worked with this material knows that the final stage of cladding is the filling of joints. The durability of the finish depends on how well this phase of work is performed. On sale today you can find many different compositions that can be used for the indicated purposes. Each of them has its own technical properties and color. The principle of choosing "for white tiles - white grout" in our case does not always work. Therefore, the question of how to choose the color of grout for tiles continues to be relevant.

In order to correctly answer the question posed, it is necessary to understand for what purposes the grout is used. This material has five main functions:

• It protects the joints located between the individual tile modules from the penetration of moisture and dirt. Properly selected grout will help prevent the destruction of the adhesive solution. By grouting, craftsmen reduce the risk of mold colonies.
• Seam filling ceramic tiles allows you to successfully mask small defects in tiles. If the composition selected for the indicated purposes has the same color as that of the front layer of the tile, the chips and irregularities of the tile will be successfully masked.
• The use of mastic forms the effect of completeness of the finish, with the help of it it is easy to form various decorative effects. So, for example, a dark grout for glossy beige tiles allows you to highlight the geometry of the pattern, make the design of the room more saturated and deep.

Sometimes when decorating the interior, different textures are used, made in different colors. You can tie together a multi-colored palette by combining the finish with one color component. As it is able to act as a grout for tiles, how to choose the right color, expert advice will prompt. They recommend that you initially get acquainted with the existing assortment, find out the purpose of each grouting material, and then make the right choice.

Types of grouts

Picking up the mastic for the tile is not so difficult. It is important to consider when choosing compositions not only their colors, but also the properties of the craftsman as a whole. On sale you can find several types of grout mixtures. Consider the most popular of them:

1. To fill wide joints, it is advisable to use a mixture of fine sand and sifted cement. To increase the strength characteristics, PVA glue is added to the cement-sand mixture.
2. Alabaster grout is used to mask small-sized tiles. It is made from white alabaster powder and water. The main advantage of this material is its soft pliable structure. The main disadvantage is the rapid freezing. That is why such material is kneaded in portions.
3. Cement fugue is sold in stores, which contains modifying additives. They allow you to get a viscous and plastic composition. The addition of pigment forms the color. Manufacturers offer a wide color palette.
4. If polymer additives are added to the cement fugue, a latex grout is obtained. They are used when it is necessary to ensure the lining is waterproof.
5. When epoxy breaks are present in the grout, a composition with high strength characteristics is obtained. Epoxy grouts, due to their high viscosity, are difficult to apply to the seams, but by overcoming difficulties, you can get a sealed lining that is not able to pass moisture.
6. Mastics based on liquid glass are called silicate. They are used to decorate mosaics. Silicate grout for tiles can be glittery, contain particles of pigments, but in most cases silicate mastics have a transparent structure.
7. Furan grout in everyday life is used quite rarely. Its main purpose is to provide protection against chemical substances. Furan grout for tiles is black.

Taking into account the functional significance of the listed compositions, it is easy to choose a grout for tiles based on existing requirements. There are universal and design solutions for choosing a color.

Universal combinations

Conservatives almost always prefer to choose white grout for white tiles, for any other light and dark tiles. In the case of light tiles, this technique helps to create a coating with a feeling of solidity.

The same effect is obtained if the color of the grout is matched to the color of the tile. Such a choice is the best option, helping to find the answer to the question of how to choose a grout for tiles.

Another technique that is often used by ordinary people is a selection of the color of the fugue in a common tone with the color of the tile. So, for example, to fill the seams of a cladding assembled with brown tiles, brown grout, beige fugue, and chocolate-colored mastic can be chosen. Tone in this case determines everything.

In the case of parietal-colored tiles, the white reveal helps to emphasize each individual finishing module.

Note! If you want to create a complex and original design you can contact design consultants during the purchase of tiles. Any large specialized store is able to offer a similar service. The simplest solutions are ready to offer the material presented in the next section of the article.

Unusual solutions

If the standard solutions outlined above seem boring, you should turn to the original solutions. They lie in the plane of a combination of different palettes.

• When white tiles are used for facing, the grout can be a fugue of any color: red, black, blue. To make the interior harmonious, it is necessary that the shade of the mastic matches the shades of other interior details. In other cases, it is easiest to use ready-made popular compatibility options.
• Light background withstands any combination. In search of an answer to the question of how to choose the color of the grout in this case, it is important to build on the mood of the interior. Sunny option - the use of yellow mastic. In combination with white tiles, it will make any room warm and cozy at home.
• Contrasting grout is suitable then, then the tiles on the walls are laid perfectly. Otherwise, the grout will reveal and demonstrate all existing masonry flaws.
• When choosing between dark and light colors, preference should be given to a light palette when there is a need to make the room visually spacious. Black tile grout produces the opposite effect.
• If the cladding is made of plain tiles and has inserts in the form of colored borders, the color of the mastic should be chosen in the same tone as the color of the decorative insert.
• Aggressive jointing gives the room a touch of extravagance. Try using a blue shiny grout for red tiles, get a stylish combination that, although it looks unusual, is perceived quite loyally.

Note! When choosing a grout for a cladding created using multi-colored tiles, it is better to use colorless compounds.

How to choose the perfect color grout?

Choosing the perfect color composition for filling the joints between tiles is easy if you follow the following recommendations:

1. You should always buy grout at the time you buy tiles. Such a move provides an opportunity to understand whether the selected shades are suitable for each other or not.
2. When choosing a store, give preference to the outlet that is able to offer the optimally large range of the materials described. Big choice provides great opportunities.
3. It is important to remember that the use of a fugue can change the visual perception of space. White grout expands the boundaries of the walls and ceiling, black - on the contrary, narrows them. This must be taken into account when deciding how to choose the color of the grout.
4. And one more circumstance. The choice of grout should be approached more responsibly if furniture is used for interior filling, to which attention should be drawn. In this case, the color of the grout should match the color of the tile. And, on the contrary, if you want to divert attention from the interior filling, you need to choose the color of the fugue opposite to the color of the cladding.

Additional decorative effects

Few people know, but on sale you can find epoxy mastics with additional effects. In their compositions there are additional decorative components. The simplest of them is mother of pearl. Its presence helps not to emphasize the presence of seams, but to slightly outline them, making them shine.

As additional decorative additives, gold or silver powder is often used. It helps to create a sparkling effect. Its use becomes appropriate when facing the solar wall.

Generalization on the topic

The article described the detailed rules for choosing the color of the grout. When buying the described material, it must be taken into account that it is on sale in two versions: in a ready-made creamy consistency and in dry form. After drying, the tile filler is able to change color. Therefore, before deciding which color of mastic to choose, you need to ask sales assistants to present samples of the finished work. It is they who will show how the selected shade will behave after complete drying. Compliance with the proposed recommendations provides an opportunity to obtain existing expectations.

The final step in laying tiles is jointing or grouting. With the help of a properly executed grout, you can easily mask small defects that probably occurred during installation. But how to choose a tile grout to emphasize the beauty of the tile and not spoil general form surface and the room itself? The hygiene and tightness of the surface depends on the correct choice of the fugue, both its color and properties, and, of course, the high-quality filling of the seams. If you do not use grout, then dust and debris will get into the gaps between the tiles, and over time, small insects can even settle there. In addition, if you do not grout the seams, then moisture will quickly get under the tile, and this increases the likelihood of fungus.

The main types of grout for tiles

When choosing a grout for a tile, you need to be guided by its type and purpose. High-quality tile grouts usually contain cement, varnishes, latex and impregnations. Before choosing a particular type, you should familiarize yourself with the characteristics of the material and, based on this, choose the best one for your case.

Today, manufacturers offer two types of grout for tiles - based on epoxy resins and based on cement. To fill difficult places in the cladding, there are silicone sealants specially designed for this purpose. Remember that you can start only after a day after laying the tiles.

Cement-based grouts are usually dry mixes that are diluted with water or liquid latex before use. Ready-made grouts are also sold, which do not need to be diluted, but their cost is much higher. Cement grouts can be with or without sand. Grouts with the addition of sand are recommended for use in cases where the width of the joints between tiles is more than 3 mm. If the width of the joints is less than 3 mm, then cement grout without sand is more suitable. You can always read in the manufacturer's instructions for what width of seams a given reveal is intended for.

Some grades of these two types of grout can be used on both enamelled and non-enamelled tiles. But keep in mind that grout with sand should not be used on surfaces that can be easily scratched, such as sensitive glazed tiles or marble.

It is worth noting that cement grouts have their drawbacks: they are usually not resistant to moisture and cleaning agents. In addition, the color range of such grouts is very poor, because the color is dictated by the materials. Therefore, most often cement grout is gray or white.

Epoxy grouts contain epoxy resin and hardener. It is they who make the seams more resistant to mechanical damage and various chemical influences. Epoxy grouts can retain their original color for up to 50 years. Since this grout is quite expensive, it is rarely used at home. Usually only specialists work with it, since this fugue is very viscous and you need to have skills to work with it. Epoxy grout is used in cases where the width of the joints is more than 6 mm. If the width of the tile joints is smaller, then it does not make sense to use this grout, since it simply will not penetrate such narrow joints.

In stores, you can also find grouts with the addition of latex. But they need to apply a special moisture-resistant grout varnish. So the grout will retain its color longer, and practically will not absorb moisture.

Choosing a grout color

The choice of grout color is a very important and crucial stage, since an incorrectly chosen shade can ruin the whole “picture” for you and, conversely, with the help of a well-chosen color, you can very well transform the lined surface, emphasize the advantages of the selected tile and hide minor flaws made in tiling process.

Of course, in such a matter as choosing a grout color for a tile, an individual approach is needed, which depends on the color of the tile itself, as well as the color of other elements of the room. The classic version is most often used, when the darkest shade from the color of the tile is selected and a fugue of this color is bought, but not darker. In the same way, in some cases, it is more expedient, on the contrary, to choose the most light tone in the color of the tile and take such a grout. It all depends on the specific case.

When choosing a grout color, it is important to remember a simple rule: if you choose a grout lighter than a tile, then visually all the tiles will merge, and if you choose a grout darker than the tile itself, then each tile will stand out, which will create a catchy geometric pattern of the whole composition. The game of contrast goes well with small tiles, as well as with mosaics. If you have a photo tile or a mosaic panel, then it is better to choose the color to match the cladding or choose a transparent colorless fugue.

If you still decide to choose an overly contrasting grout, then be sure to first check it on a separate copy - whether it will paint over the tile. In any case, you need to wait until the grout dries, as it changes color. If you see that stains remain on the tile, then you should choose a different grout or use a special liquid filler designed to cover the tile immediately before jointing.

In the event that you are lost among the many shades and cannot choose the right color in any way, then feel free to make a choice in favor of a white fugue. This is the most win-win option. White grout is almost perfect for most tiles. Remember that in wet rooms it must certainly be moisture resistant. To prevent darkening, the seams can be additionally treated with a special protective agent. But for the floors, the white color is completely unsuitable, since very soon such a grout will look dirty. Here it is worth using a gray grout, which is close in color to cement. Also, brown or gray-blue grout is perfect for the floor.

Jointing, as well as tiling itself, is a rather painstaking process that requires attention and accuracy. To obtain reliable protection of surfaces from the effects of dirt and moisture, you should choose grout only good quality. And be sure to make sure that it is harmoniously combined in color. It is in this case that you will get an excellent result, and your walls and floor will look beautiful and neat.