In the pre-New Year bustle, sometimes there is no time for the Christmas tree: crowds in stores and at specialized Christmas tree markets discourage anyone from purchasing a fluffy beauty. However, in order to have a real Christmas tree in your home, you don’t have to buy it. From this article you will learn how to make a Christmas tree with your own hands from scrap materials.
We have collected more than 20 master classes for you with step-by-step photo instructions, so creating a holiday atmosphere in your home will not be difficult, even if there is absolutely no time left. These lessons will also be useful for mothers, because creating miracles with your babies is a pleasure!
By the way, if you already have a real tree (artificial or natural), a DIY Christmas tree will be an excellent themed gift for family and friends! In general, stock up on the New Year's mood and go ahead and create!
Let's start with, perhaps, the simplest option - a Christmas tree made of paper. To make it you will need colored paper, scissors, glue, toothpicks and a hole punch.
#2 Christmas tree made from wrapping paper
To make such a Christmas tree you will need: cardboard or thick paper, wrapping paper of several colors, scissors, glue or double-sided tape.
#3 Origami Christmas tree
To make a Christmas tree you will need: paper, scissors and patience :)
See more paper Christmas trees:
To create you will need: felt, scissors, needle, thread, glue.
You will need: felt, buttons and beads for decoration, needle, thread, cotton wool, scissors.
Find more felt Christmas trees in the article:
#6 Christmas tree from a plastic bottle
You will need thick paper, a plastic bottle preferably green, scissors, and tape.
#7 Christmas tree made from table napkins
You will need: table napkins, a bead, a sewing machine or a needle and thread.
You will need: a plastic bottle or wine glass, pasta, glue, paint.
Need more pasta ideas?
You will need: thick paper, pine cones, glue.
We have more ideas for crafts made from pine cones:
You will need: thick paper, coarse threads, glue, beads.
#11 Wire Christmas tree
You will need: thick paper, wire.
#12 Christmas tree made from dough
You will need: salt dough (cold porcelain or polymer clay), scissors. We form a cone from the modeling mixture, and then “pinch off” the legs using scissors. For greater realism, the legs can be slightly bent upward. Next, we send the Christmas tree to dry. After complete drying, the craft can be further decorated, for example, with paints, sparkles, beads, rhinestones, etc.
You will need: thick paper, colored paper, glue, a lot of patience.
#14 Christmas tree made from cardboard toilet paper cylinders
You will need: toilet paper roll cylinders, crepe paper, scissors, glue, thread.
Are there any bushings left? Make more original New Year's crafts!
#15 Christmas tree made of threads
You will need: paper, thick threads, scissors, glue, beads.
#16 Christmas tree from an old magazine
You will need: a magazine, glue, beads or glitter for decoration.
You will need: cotton wool, a dry twig, threads, ribbons, beads and sparkles for decoration.
#19 Christmas tree made from wine corks
You will need: corks, glue, tapes, paints.
#20 Delicious Christmas tree made from strawberries
You will need: thick paper, strawberries, chocolate.
#21 Christmas tree made of wrapping paper
You will need: wrapping paper, glue, whatman paper, decorations.
#22 Christmas tree made of balls
#23 Christmas tree made from dry branches
You will need: dry branches, rope, lanterns and other decorations.
#24 Christmas tree made of cotton pads
If you want to make a Christmas tree from scrap materials, then it’s time to pay attention to cotton pads. You will need thick paper for the cone, cotton pads, glue and beads for decoration. By the way, you can decorate the Christmas tree with any materials of your choice: sparkles, sequins, watercolors. Or you can just leave it white. As you prefer or as time allows.
Even more crafts for the New Year from cotton pads:
#25 Christmas tree made of ribbons
You can make a cute Christmas tree from ribbons. To do this you will need a foam or foam cone, ribbons and a lot of safety pins. The top of such a Christmas tree can be decorated with a gold paper bow.
We are full of ideas for New Year's crafts made from ribbons
#26 Christmas tree made from a napkin: decorating the New Year’s table
You can make a Christmas tree from table cloth napkins. Both the Christmas tree and the decor of the New Year's table. Try it and you won't be able to stop!
Help us improve: if you notice an error, select a fragment and click Ctrl+Enter.
Good day, friends!
Soon, soon New Year!
He's in a hurry, he's coming!
Knock on our doors:
“Children, hello, I’m coming to see you!”
We are celebrating the holiday
Decorating the Christmas tree
Hanging toys
Balloons, crackers...
This is how I decided to start today’s post in an unusual way. Which will be dedicated to making them at home. After all, we all traditionally love to give them for the New Year. Namely, I suggest making a Christmas tree from what you have on hand. It can be anything, for example, paper, cotton pads, dry twigs, etc. After all, we all dream of surprising our loved ones with something special and unique. Therefore, if you are still thinking about what to give to mom, dad, etc. then you have a ready-made solution).
Of course, every home on New Year's Day has a brightly decorated living “forest beauty” that flickers and blinks with multi-colored lights. I suggest making a “little friend” so that she doesn’t get bored. And behind one, your decor in the rooms will be transformed, or perhaps you will place it on the holiday table.
In addition, this creative work will bring a lot of positive emotions and will delight children. Moreover, the winter evenings are long, and you can afford to create something beautiful and green).
Although it doesn’t have to be exactly this color, white is also in fashion. The tree will look as if it is covered in snow or frost.
I’ll start with perhaps the most grandiose and magical tree in my opinion. I suggest you look and study these instructions in order to create such a funny and cheerful beauty for yourself or someone else as a souvenir. The work is made of sisal, who does not know this coarse fiber of a tropical plant.
On a note. A special feature of this craft is the presence of funny legs instead of a stand. And if you remove them, you get topiary, which can be made from any material, for example, coffee beans or thread.
Well, take action by looking at these pictures and detailed descriptions.
We will need:
- green sisal – 25 g
- Kinder Surprise cases
- heat gun
- Styrofoam
- wire
- green pencil - 2 pcs.
- colored paper
- green threads
- decorative braid
- any decorations such as balls, beads, etc.
- cardboard
Stages:
1. Take the Kinder case and cut off the lid. For the small part, cut off a small section on one side with a semi-oval, so that you can glue it together later.
2. Using a glue gun, glue the two parts together. This is how the boot will turn out, top top.
3. You should end up with two identical shoes. Make a hole in the largest bottle opener. Have you guessed what it is needed for?
4. Now let’s decorate the shoes. To do this, take a red sheet and cut out two strips 19 cm long and 2 cm wide.
5. Glue the longest strip, wrapping it completely around the shoe and giving it the desired shape.
6. Then glue decorative tape along the entire diameter of the sole for a beautiful appearance.
7. Then take your pencils.
8. Poke them into the prepared holes, and add a little glue so that they hold tightly. The legs are almost ready.
9. All that remains is to decorate them with tinsel, do as shown in this photo below.
11. This is what should come out. What does it remind you of already?
12. Now take the wire and insert it into the tip of the cone. Wrap it in sisal too and tie it with thread.
13. The next step is to make a skirt for the stomper. To do this you need to make pounds. Make rectangles of fabric measuring 10 cm x 9 cm, their number should be from 60-80 pieces. depending on the fullness of the skirt.
14. Then start gluing with a hot-melt gun. In this order. Bend the rectangle in half, but along an oblique line. Secure with glue.
16. Then lift the right edge and glue it together.
17. The funnel is ready. It's really a funny name, even a little funny.
18. Then start assembling the Christmas tree. Glue the blanks in a circle.
19. To create a skirt later.
20. Insert the legs into the base.
21. Then use your imagination and get creative, glue on various kinds of decorations.
22. Glue a bow with beads to the top of the spruce and wrap it around the craft.
23. There will also be snowflakes and rhinestones here. Place the resulting masterpiece on a stand. Good luck.
How to make a voluminous Christmas tree out of paper at home
I think that many have ever thought about this question. After all, schools and kindergartens often give assignments on this topic. I suggest making, for example, a silhouette Christmas tree. To do this, take this sample and print it on office colored sheets.
Afterwards, cut out with a stationery knife and glue the blanks together. Use special clamps for this.
You can make a whole forest of such colorful coniferous beauties.
The following work will be completed in 5 minutes. Don't believe me? It couldn’t be simpler; you will need circles of colored double-sided paper and a pencil on a stand. The diameter of the blanks you see below:
1. Fold the circle in half with your hands, so that you get a semicircle.
Do exactly that! Carefully iron the fold with your hands.
2. Now fold the semicircle in half again.
4. And in the same way two more times.
6. And this is what happens. Carefully trim the ends of each piece with scissors.
7. Start assembling the product. Place all the blanks on a stick. From the largest circle to the smallest.
8. The only thing missing is a star or Santa Claus.
I especially found a video for you so that if you need it, you can, in addition to everything else, roll up a grandfather out of paper. A new article will be released soon, in which you will find many works with this hero, but for now, watch the story.
For those who found the first option quite easy and simple, you can take and fold a Christmas tree in origami style; for instructions and description, see below in this film.
Christmas tree made of beads for beginners (diagram inside)
The next creation of nature is wow, cool and at the same time elegant. And such a souvenir will last for more than a dozen years. This is a spruce made of beads. I thought it was impossible to make such a tree myself. But as it turns out, I was wrong. I am sure you will cope with such work with a bang.
We will need:
- green beads - 7 shades
- white beads or transparent
- plate from under the flowerpot
- acrylic paint: white and brown
- wire 0.4 mm
- PVA glue
- ruler
- rod 4 mm and length 2 cm
- tape
- alabaster
1. Place the beads in a cup and mix all the colors. Place beads on the wire in different color sequences and measure 2.5 cm using a ruler. At the same time, leave the edge in the region of 5-7 cm without beads.
2. Make a loop for four circular turns.
3. From the loop, step back 2 cm of wire free and without beads of wire and again count 2.5 cm and make a loop.
4. For the smallest branch, wind 7 loops in this way. Then find the middle and fold it in half and twist the elements together.
5. Thus, you should have this number of branches.
7. Now take the rod and wrap the tape, and then 4 branches with 7 loops to it. The first one is in the center, and the rest are placed below in a circle, twist the stick and wrap it with tape.
6. Next, take 6 branches of 9 loops each. Wrap them in a circle in two tiers of three branches, wind them in a circle. Then step back down about 7 mm and take 5 branches of 11 loops each and wind them in one tier.
7. Retract 7 mm again and wind 6 branches of 11 loops each and again divide them into two tiers. And so on. The final stage is 5 branches of 7 loops.
Rewind the remaining barrel with brown tape. Spread the branches to make the tree lush.
8. Bend the table at 90 degrees and place it in a cup from under the flowerpot. Pour alabaster solution into it and let it dry.
9. Wait until the tree sets; you can also plant any symbol of the New Year. For example, a pig or a rat.
Make a thick solution of PVA glue and alabaster, dip it in a kitchen napkin and glue it to the trunk. To get a natural look.
10. After complete hardening, start painting, but first remove the product from the cup. Paint the trunk brown and the platform white.
11. Decorate with large beads in the form of toys or something else.
Now a few more instructions that I found on the Internet.
But this model is somewhat similar to the first one, maybe someone will like this one more.
And look how lovely it is.
Well, in conclusion, I would like to show one more example of a flat spruce tree, which you can use as a pendant or keychain.
Kanzashi style Christmas tree made of satin ribbon
Well, friends have now reached another elegant option, which looks quite bright and elegant. The green beauty turns out beautiful and lush. But first, you must master the kanzashi technique; for this you need to learn how to make special blanks in the form of triangles. Take a look at the diagram, if it is not clear, you will find a more detailed master class on making such things.
You have to take a green satin ribbon, cut it into pieces measuring 5 cm x 5 cm and repeat all these steps.
Or consider this tip.
Thus you will need:
- cone made of thick paper or cardboard
- satin tape
- star
- scissors
- wire
- candle
- heat gun
Stages:
1. Prepare everything you need for work. Place the gun to warm up.
2. Carefully and slowly glue the fabric blanks to the surface of the green cone in a circle and in a spiral.
3. Try to place all the triangles fairly close to each other. After the product is ready, take a star or any bow and glue it to the wire.
4. Place the ornament on the top of the tree. Decorate the souvenir with beads; they will act as a garland.
I came across a more simplified version of the craft in this film, perhaps you will also like it and you and your children will master this technique. Good luck!
Spruce made from cotton pads: a craft for kindergarten children
Now let's get acquainted with a fairly simple craft that you can easily do with your child at home or in kindergarten in class. This option is so easy that it is suitable for any younger or older group.
For creativity, you will need to decorate cotton pads with green gouache. Let them dry completely. Then roll it into a petal and secure it with glue.
Since a Christmas tree is usually made for the New Year, let’s glue the snowdrifts on the blue background sheet first of all. And then arrange and glue the green blanks in the desired sequence in descending order.
You can also get creative and build a snowman or other character. Give free rein to your imagination and the souvenir or postcard will be ready.
It is with these triangular blanks that you can build other options.
The next option, for which you will need the materials you see in this picture. Make a bag out of cardboard, glue the parts with double-sided tape, and make the bottom even.
And then dilute the blue gouache in some water and dip a cotton swab in it. Draw dots along the outline of the disks.
Then glue the round pieces onto the cone, overlapping one on top of the other.
Then decorate the craft to your taste. Winter beauty is ready. What do you think of the idea? The truth is super and fast and cool!
You can go another way: fold each disc in half three times and fasten it with a stapler. Then glue these triangles onto the white cone. And then decorate the Christmas tree with beads and a star.
Or you can also go the other way, make a three-dimensional craft by cutting a cotton pad into four equal parts. See it all for yourself below:
The youngest assistants can be asked to do this kind of work.
Forest beauty made of spruce and pine cones
Of course, not a single New Year's holiday is complete without tangerines and, of course, pine cones. So why not use that too. After all, such natural material is easy to collect in a forest or park, and then sit down and make it.
We will need:
- gun
- scissors
- cardboard
- bumps
- varnish in a can
Stages:
1. Make a cone from a sheet of A4 paper and glue the ends together. Let me remind you how to do this. Draw a circle, and then cut it in half, coat the walls with glue and let dry.
2. After starting to assemble the product, glue the cones to the workpiece in a spiral. So until the product takes on a finished look.
3. Coat with glitter varnish for durability.
4. Cut out a star from a shiny lid or any other material.
5. Decorate the top with it.
You can go another way and make such a forest charm from husks. Also glue a cone out of paper.
And it is on it that, using a glue gun, glue the particles in a spiral, one after another.
For completeness, decorate with beads or other decorations that are typical for this holiday. For example, tinsel and stars.
Christmas tree made from candies (step by step instructions)
Do you like sweets? Oh, and I just love them. I propose to lay out the symbol of the New Year from them, and take a bottle of champagne as the base.
1. Glue the green fluffy tinsel onto the champagne in a spiral using a glue gun.
2. As soon as the first row of tinsel is glued, glue the candy wrappers (tips) at the same distance.
3. And then add something else, for example a bow.
4. Well, how do you like this wonderful idea? Cool, congratulations to the author! It’s not a shame to go on a visit with such a souvenir).
DIY sisal Christmas tree
Preparations for the New Year are in full swing, so let's do something interesting from such material as coarse fiber. Nowadays it is often used because it is not very expensive, and everyone wants to create with it.
We will need:
- sisal fiber green and white
- filler
- bamboo stick
- plastic cup
- cardboard
- satin tape
- scissors
- decorative elements: bows
1. Fold a cone from a sheet of cardboard and glue it together. Place the filler in it and insert the stick. The wand will need to be decorated with a satin ribbon. Secure the ends of the tape with glue.
2. Also add filler to the glass and put something heavy on the bottom, such as coins. Use corrugated paper or other material to decorate the glass; it will act as a stand. You can also put a piece of foam rubber on top, for strength, and make a hole in it for the stick.
Insert the prepared cone on a stick into the stand.
3. Roll the sisal into balls by hand.
4. Glue them to the workpiece in different combinations, I mean color. Alternate at your discretion.
5. Now dress up the beauty and sprinkle a little glitter polish. All that remains is to admire or give this masterpiece to someone.
Video on how to make a decorative Christmas tree from threads and PVA glue
And another little beauty that will fit very nicely into any interior or will be an excellent gift, like a miracle made of thread. Watch this story and follow all the steps from the author.
I decided to prescribe the next option for you, please read.
We will need:
- PVA glue
- threads
- foil tape
- disposable cup
- cardboard or old box
- plastic bag
- battery operated candle
Stages:
1. Form a cone out of cardboard and glue it with foil tape. Dry. Then put a bag on the geometric figure, fix it even inside, otherwise it will fidget around the workpiece.
2. Place the threads in PVA glue diluted with water (50 to 50). But before that, make a hole in the cup right at the base and thread a thread into it.
3. Fill the cup with glue solution so that the entire thread is covered in glue.
4. Now start winding the thread around the cone in a spiral.
Important! The thread should not be too tight; it should lie easily on the surface of the cone.
3. Thus, in the end you will receive a new souvenir, cut the thread. Leave to dry.
4. After drying, remove the Christmas tree from the workpiece; the PVA will dry and become transparent.
5. Decorate the gift with sequins and then turn on the battery-powered candle and place it in the very base.
6. The Christmas tree will twinkle and act as a mini-lamp or garland.
Craft for the school competition “Tinsel Tree for New Year 2020”
Now we move on and perform the symbol of next year using ordinary tinsel. Still, such material is also an indispensable attribute. Do you agree? Plus it looks really beautiful and charming. Take a look for yourself.
We will need:
- tinsel of different colors
- cardboard - 2 pcs.
- glass or pot
- foil sleeve
- glue gun and PVA glue
- scissors
- thread with needle
- wire
- any decorations, lace fabric, bell, balls, etc.
1. Make a cone out of cardboard, take it green.
2. Then cut out a circle from another sheet, 1.5-2 cm larger than the diameter of the geometric figure.
3. Then make these slits on it.
4. On a round piece, trace a sleeve in the middle so that you can cut a suitable hole.
5. Glue the circle to the cone. This is what will happen in the end.
6.Wrap the sleeve with decorative tape and insert it into a cup with plaster.
7. Make a skirt out of lace, assemble it with a needle and thread to make it airy and fluffy.
8. Glue in two tiers to the green blank. Cut the tip of the cone and insert a wire with a bell into it.
9. Now take a glue gun and use it to fix the tinsel in a spiral.
10. Then glue on balloons and other decorations such as beads. Your magical miracle is ready. Create for your health!
Video tutorial on making a New Year's tree from foamiran
If you want something unusual, then I am glad to present you with another little green joy. It will be needle-shaped, and the material will be foamiran. It is quite unpretentious, easy to work with and the most important advantage is that it does not crumble. So, go for it.
Don’t forget to use artificial snow for decoration, which will give the spruce tree unprecedented beauty and brightness.
Vintage corrugated paper Christmas tree
Now there is one more craft that you can also take and perform for an exhibition in a kindergarten or school. The technique will be trimming. Are you familiar with this method? I hope it's very good. And if not, then you will find out now. To work you will need corrugated paper, PVA glue, scissors, and a cardboard cone. And of course, a good mood.
1. So, take a cone to work with. This is what we will be processing now.
2. But before you do this, cut the corrugated squares: 1 cm x 1 cm, 2.5 cm x 2.5 cm, 3 cm x 3 cm, 4 cm x 4 cm, 5 cm x 5 cm, 6 cm x 6 cm.
You can replace corrugated paper with regular paper napkins.
3. Take a small square and wrap it around a stick, then dip it in glue and glue it onto the cone.
4. In this way, fill the entire geometric figure and move in a circle.
5. Take the smallest squares first, then larger and larger ones.
6. You can also make a star out of paper on the top of your head. Or take a ready-made version from the store.
This is the kind of wonderful green souvenir you should end up with. Don't forget to decorate with any beads or rhinestones.
Creative spruce made from plastic bottles
I think that in any home there is a plastic bottle. Take it light green in color. The steps are quite simple, do it with your children to occupy your family leisure time.
Stages:
1. Cut out the middle of the bottles, and then cut it into pieces.
2. You should end up with rectangles like this. From which the branches for the Christmas tree will be made. Their sizes are:
- 8.5 cm x 6 cm – 6 pcs.
- 7 cm x 6 cm – 6 pcs.
- 6.5 cm x 6cm - 5 pcs.
- 6 cm x 6 cm – 5 pcs.
- 5.5 cm x 6 cm - 4 pcs.
- 5 cm x 6 cm – 4 pcs.
- 4.5 cm x 5 cm - 3 pcs.
- 4 cm x 5 cm – 3 pcs.
- 3 cm x 3 cm - 3 pcs.
3. Round each rectangle, bend the tip, and cut after the edge, as shown below.
4. For curl, scorch the fringe with a candle.
5. And then paint the fringes with acrylic paint or nail polish. Pollinate with glitter.
6. Thus, you should make this number of branches, and make a hole on each branch.
7. Then take a stick and stick it into the bottom of the bottle. This will be a stand for a souvenir. Make the hole using a drill.
8. Well, now all that remains is to assemble the Christmas tree, thread the branches onto the stick.
9. Looks chic and attractive.
10. Decorate with a bow and beads. Give such a masterpiece to your friends or keep it for yourself for the New Year's table. Product height 20-25 cm. Cool!
Christmas tree for New Year 2020 from scrap materials (100 ideas)
The time for miracles has come, and so let's get your apartment today. Which each of you can create yourself. For example, you can use this idea and decorate the walls in any room. Such a nice craft will lift everyone's spirits. You can make such a drawing in a school classroom or even a kindergarten room. In principle, anywhere, even in the office.
Such hanging Christmas trees look elegant, and they can be made from anything, as in these pictures. These could be chopsticks or even utensils, take a look:
Or decorate the figure with any lamps or New Year's garlands.
A souvenir with your photos and images on it looks cool.
And also perform illumination. Wow, it’s breathtaking especially in the dark, when it’s already evening or night.
You can add spruce branches or use them to do the work.
You can also create an elegant composition even from ordinary sheets of magazines.
From ordinary leaves for notes you can also make a craft in the form of a Christmas tree, both three-dimensional and for the door.
It has now become fashionable to make compositions on doors or walls. Here's an example from old book pages:
But even in stores they make such wonderful decorations from the books themselves.
Again, depending on where you work, if it’s a clothing and shoe store, then you can disguise the mannequin like this.
In addition, you can also take ordinary wine corks from waste materials and voila, a new masterpiece.
Or use the simplest idea - draw a Christmas tree.
Or make the desired shape using the template.
Well, if you are a very creative person, you can even do the work from machine tires or plywood.
If you work in a hospital or your specialty is related to medicine. Then you can put it this way:
And from ordinary wooden blocks it is also possible to create something beautiful, as shown in this picture.
You can also turn an ordinary stepladder into something very cool, take a look, what does it remind you of?
They even make Christmas trees out of plastic or paper pipes.
And here is another souvenir made from disposable plates.
Or line it with fabric and modern glass marbles.
Or use bows.
For those who are interested in needlework (for example, you can take foamiran or felt) or knitting:
New Year's toys are also used to hang such cool little things that resemble a forest beauty.
This is where the wire was used.
And here they made a cardboard frame.
Crafts are also made from ordinary napkins and newspapers.
Or use scrapbooking paper.
Once I even saw a gorgeous creation made from egg cups.
You can also create a masterpiece out of pillows.
The most original crafts are these, made from bottles.
Here’s another idea from jelly jars or take any containers.
With the kids you can easily make a Christmas tree out of plasticine.
By the way, you can create sweet masterpieces that are also edible. You will need waffle cones and cream.
And here is another beauty, which is made of sweets or cookies.
You can create unusual souvenirs from fruits and berries. I think that children will not resist such beauty and will immediately want to try it on their tongue.
Here's another pasta idea.
And you won’t even believe it, they create products from disposable spoons and forks.
Here is another work made from wool balls and buttons in the shape of a cone.
And here, look, shells were used.
This masterpiece looks quite unusual; it is made of feathers.
Or from a material such as floral mesh or sisal.
Here are a couple more ideas.
That's it, friends, that's all I have. The post turned out to be quite long, but I hope that you found what you were looking for. Create such wonderful decorative Christmas trees yourself or together with your children and be happy. After all, such a souvenir always exists and will be the main attribute of the New Year.
I wish that all your dreams and expectations come true in the near future. Good luck everyone and have a great day! Bye.
Dapoxetine acts on the cerebral cortex, which promotes natural sexual arousal and slows down sexual discharge. According to clinical studies, the drug prevents premature ejaculation in all adult patients. That is why you can have no doubt about the effectiveness of the generic! The active substance begins to act half an hour after administration and remains effective for 2 hours.
One tablet can be taken once a day. It is recommended to take the drug with plain water. You should not drink large amounts of caffeinated drinks while taking Dapoxetine, as this leads to increased heart rate and increased blood pressure.
The tests carried out did not reveal any serious side effects when taking the medication, so you can safely buy dapoxetine in our pharmacy and enjoy a rich sex life. However, if the dosage is exceeded, headaches, nausea leading to vomiting, pain in the abdominal cavity and rapid heartbeat may occur. In this case, you need to contact your treating specialist.
Below are the main contraindications in which you should refrain from using Dapoxetine: 1. Individual intolerance to lactose or other components of the medication. 2. Severe liver pathologies (cirrhosis). 3. Heart rhythm disturbances, heart failure.
The stimulant should not be combined with the following drugs:
1. Antidepressants.
2. Psychostimulants intended for the treatment of schizophrenia and other mental disorders.
3. Medicines intended for the treatment of migraine.
4. Drugs containing lithium.
5. Preparations based on St. John's wort.
6. Strong painkillers (Tramadol).
If your doctor has prescribed you one of the above medications, you must complete the course of treatment, and only after two weeks you will be able to take Dapoxetine without fear for your health. After you have finished taking this stimulant, you should avoid taking the following medications for one week:
1. Means for the treatment of fungal pathologies.
2. Medicines intended for the treatment of HIV infection (ritonavir).
3. Antidepressants.
If you are taking any strong medications at the same time, be sure to consult your doctor before purchasing Dapoxetine. Another useful recommendation: before taking the pill, measure your blood pressure and make sure it is normal. Is there a difference between generic dapoxetine and the original drug? Some people are still convinced that a generic drug is a fake that does not deserve attention. However, it is not. Manufacturers develop a generic dapoxetine based on the composition of the original drug; only the color of the tablets and packaging design may differ. That is why the effectiveness of the generic is no worse than the effectiveness of the original Dapoxetine, and its cost is much lower.
The shelf life of the stimulant is three years, and it is recommended to store it in a cool and dark place out of reach of children. Do not use the drug after this period, otherwise its effectiveness will be in question. Thus, generic Dapoxetine will give you a vibrant sex life and long-lasting sexual intercourse that can completely satisfy your partner! You can purchase this drug in our pharmacy at an affordable price. To order, call us by phone and indicate exactly how many tablets you would like to buy. We provide prompt delivery by courier or by mail, the timing depends on your locality.
Recently, people are increasingly refusing to buy live Christmas trees in favor of artificial ones in order to somehow participate in saving nature. In return, some people buy artificial trees, while others prefer a DIY Christmas tree - especially since it can be made from almost any available materials!
DIY Christmas tree made from bottles
Very often, a lot of extra plastic bottles accumulate in the house, which make wonderful DIY Christmas tree. The plastic from which the container is made can take almost any shape under the influence of mechanical force or heat.
You will need one clear plastic bottle for the base - the taller it is, the taller your tree will be. The needles need to be made from two green bottles the same size as the white one.
- Cut off the bottom and neck of the green bottle, and cut the rest into circles.
- Each ring needs to be cut into several parts. The fewer parts, the shorter the length of the pine needles.
- On each of the resulting rectangles, make many cuts that do not reach the edge - the more cuts, the narrower the spruce needles.
- Start gluing the pine needles in rows to the base bottle from the bottom using double-sided tape. Secure the parts on top with regular tape to hold them more firmly.
- Cut off the threaded part from the neck and cut it into 2 parts lengthwise.
- The lower part of the neck must also be cut, forming a part with needles.
- Secure the resulting part around the top part, and tuck the protruding tape inside the product.
- Also cut the very top part into many needles.
- Roll the resulting top into a tight bun and insert it into the hole at the top of the future tree.
Your Christmas tree is ready!
The beauty of this method is that you do not need to use any special techniques for twisting the plastic - due to the fact that the parts from which the needles are made are cut from the circumference of the bottle, the Christmas tree with your own hands turns out to be curly on its own.
The craft turns out to be quite voluminous - a large plastic forest beauty can be placed on the table and decorated with light homemade Christmas tree decorations. If you want a small, souvenir toy, it is better to take a half-liter bottle as a base.
How to make a Christmas tree from disks
Never throw away old CDs! From their mirror shiny surface you can create many interesting crafts for the New Year - such as making a Christmas tree with your own hands from disks, for example.
The only disadvantage of the idea is that you will need a lot of disk blanks for work - if you don’t have them, you will have to buy more in the store for a symbolic amount. As a base, take a large flat slab - for example, foam boards for finishing the ceiling.
- Place double-sided tape on the stove, drawing a Christmas tree with it.
- Glue disks on top: two - instead of a tree pillar, and form a crown from the rest, laying out the material in rows. In this master class, seventeen pieces were needed to create the entire tree.
- Decorate the Christmas tree to your taste. For example, the author of the lesson used multi-colored foil from which he cut out templates for Christmas tree decorations.
- Cut the finished product along the contour with a stationery knife.
Such DIY Christmas tree Can be a great decoration for front doors or windows. In addition, during the New Year holidays, you can replace one of the wall paintings with it. The size of the product can easily be changed depending on where you want to hang this decoration. For example, such a toy will be enough for windows and doors, but a larger Christmas tree will look better on the wall.
The work is very simple. Involve children in the process, and you will see how much they like to create such a brilliant New Year's beauty together with you.
Christmas tree made of ribbons: DIY
It often happens that there are no extra plastic bottles at home, and the disks are all occupied with some important information - but I really want to make home decorations with my own hands on New Year’s Eve. Dont be upset! The forest beauty can be made from a variety of materials.
For example, a Christmas tree made from ribbons, made by yourself, will look very beautiful - you won’t be ashamed to give it to friends or put it on your desk in the office.
- Take any green ribbon. Choose a wide or narrower one, satin or chiffon, dense or transparent - it all depends on what kind of Christmas tree you want to get.
- One of the long sides of the ribbon needs to be strung on a long thread and gathered so that ruffles and curls are formed. It is necessary that the thread matches the base material, otherwise it will stand out unattractively against the general background.
- Cut out a semicircle from green, not very thick cardboard.
- Fold the shape into a cone and secure the edges with a stapler, tape or any paper glue.
- You need to glue the ribbon to the cone, starting from the bottom. Use “Moment” or “Moment-gel” glue.
- Gradually wind your ribbon onto the base, moving in a spiral to the top.
- The top of the tree should be decorated with shiny foil or braid - wrap it around the cardboard blank in the same way as the green ribbon, but starting from top to bottom.
- Make your own Christmas tree decorations from the same gold material.
- For example, cut several not very long strips of gold ribbon, fold its edges towards the center and tie it in the middle with a thread, forming a bow.
But the decorations don't end there. Your DIY Christmas tree can be decorated with beads, miniature garlands, brooches, pieces of rain and sparkles.
The following video tutorial will offer you another option for creativity - it will tell you how to make a Christmas tree with your own hands from ribbons using the kanzashi technique.
DIY pasta tree: step-by-step photos
Recently, items such as ordinary dry pasta of various types have become especially popular among handicrafts! The fact is that from interesting twisted flour products you can get very beautiful works, such as Christmas tree decorations, costume jewelry, and decorative items.
A DIY Christmas tree can also be made from pasta. Stock up on spiral-shaped thick, not very short curls - a pack of one kilogram should be enough for you. Also, prepare some bow-shaped macarons, a glue gun, plaster of Paris, a small shot glass, a small stick, a foam cone and spray paint.
If you cannot find a foam blank in your city, replace it with a simple cardboard cone made in the same way as in the master class of the previous point.
- Attach a stick to the bottom of the cone - it will serve as a supporting stem. Using a glue gun, start attaching your pasta to the workpiece, starting from the bottom.
- The first row should be glued completely to the cone, and the rest - at a slight angle to create the feeling of a fluffy crown.
- Try to glue the pasta in the last row so that their corners almost completely cover the top of the foam cone.
- Take a transparent glass and mix the gypsum solution in it. While the mixture is still wet, insert the barrel of the cone into the mixture, completely submerging it in the stack.
- Use a flour bow as the top of the tree - they can also be pasted over the entire area of the tree, like decorations.
- Use spray paint to coat your piece with color. A gold or silver Christmas tree will look best. In addition, the classic New Year's colors look beautiful: green, red, white.
The larger the cone you take, the higher and more magnificent yours will turn out. DIY Christmas tree. Despite the simple idea and ease of implementation, the product looks very impressive, so don’t be afraid to decorate your desk, holiday banquet or apartment with it.
As a bonus, you are presented with this video tutorial - with its help you can make another version of the Christmas tabletop Christmas tree from pasta.
Take it for yourself and tell your friends!
Read also on our website:
show more
There are a lot of options for what you can use to make an elegant New Year tree. Let's consider those that can be made from simple available materials. All our Christmas trees will be voluminous.
1. Christmas tree made of cardboard
For a Christmas tree 10 cm high we will need a sheet of cardboard, colored paper and scissors.
Procedure: fold a sheet of cardboard in half and cut it. We put two parts on top of each other and draw the silhouette of a Christmas tree on one of them. Cut out the silhouette along the drawn lines. We cut each of the resulting parts to the middle - one from the top part, the second from the bottom part. After this, we insert one part of the tree into the other. All that remains is to decorate the Christmas tree using figures cut out of colored paper. For example, place a star made of yellow paper on the top of the Christmas tree, and glue circles on the “branches” that will replace the balls.
Using a similar scheme, you can make a Christmas tree from whatman paper, and also connect together not two, but four or six cut out silhouettes - then the Christmas tree will turn out to be especially lush.
2. Christmas tree-cone made of paper or cardboard
You will need: a sheet of thick paper or cardboard (color is not important), glue, decorations.
Work order: twist the sheet so that it forms a cone. Trim the bottom part so that it forms a regular circle. We fasten the craft with glue. This will be the base of the tree. Then everything depends only on your imagination. You can decorate the Christmas tree with cotton wool, beads, and paper snowflakes.
3. Pasta Christmas tree
You will need: hard pasta in the form of tubes or curls, a sheet of cardboard, a glue gun or plasticine, paint, decorations.
We roll the base of the Christmas tree out of cardboard to form a cone. Next, using a glue gun, we begin to attach the pasta row by row, moving from bottom to top. Pasta will not stick to regular PVA glue. But, as an option, you can cover the base of the Christmas tree with plasticine and attach the pasta to it. When the glue has set, you can start decorating the Christmas tree. For this we use paint. You can glue tinsel, beads, snowflakes and any other decorations right on top of the pasta.
4. Christmas tree made of cones
You will need: fir cones, a sheet of cardboard, Moment glue.
Procedure: roll a cone out of cardboard, glue it, cut off the bottom side to make a regular circle. The base of the Christmas tree is ready. Next, glue the cones into it, starting from the bottom row and moving towards the top of the head. You can decorate the Christmas tree with beads, nuts, snowflakes, etc.
If you have only one cone, but a beautiful one (for example, cedar or pine), then you can make a mini-Christmas tree out of it.
You will need: a pine cone, a flower pot, green spray paint, white glitter, glue, a brush, a star.
Procedure: using paint, paint the previously cleaned pine cone green. After the paint has dried, coat the edges of the cone with glue and sprinkle with white glitter. We decorate the top of the Christmas tree cone with a star. Fill the pot with plasticine and place the Christmas tree on top of it.
5. Feather tree
You will need: white goose feathers, a sheet of cardboard, glue, materials for decoration, a cup, white paper, white satin ribbon.
Work order: we make a cone-shaped base of the Christmas tree from cardboard. We attach the feathers to it using glue (preferably construction glue, so that it holds more tightly). We start from the bottom rows - we attach larger feathers there, and smaller ones closer to the top. We wrap a plastic or cardboard cup in white paper and fasten the edges with glue. You can decorate the cup with beads, stars, rhinestones, etc. We decorate the top of the Christmas tree with a bow made of white satin ribbon.
No less interesting are the options for Christmas trees made of feathers painted in different colors. You can color the feathers yourself or buy ready-made ones. The technology for creating a Christmas tree will be similar. 
6. Christmas tree made of buttons
You will need: buttons of different colors and sizes, a sheet of cardboard, glue, beads.
Procedure: glue buttons onto a paper cone, alternating different sizes and colors. It is better to glue the buttons overlapping, so as to completely cover the base of the Christmas tree. You can glue a bead into the center of each button.
7. Tree made of wood
You will need: wooden planks, sticks, scraps of old boards, shoe nails, glue, figurines or candles for decoration.
Work order: the Christmas tree is built from square planks and long flat sticks alternately attached to each other. Each subsequent rad can be attached to the previous one using either small nails or glue. You can hang tiny New Year's toys or put small candles on the branches of the tree (it is not recommended to light them).
8. Felt Christmas tree
You will need: a piece of green felt, a sheet of cardboard, scissors, a marker, glue, beads.
Procedure: roll up a cylinder of small diameter (no more than 2 cm) from cardboard and fasten its edges with glue. We cut out circles of different diameters from felt (the diameter of each subsequent circle should be larger than the previous one). We fold each circle in four and make a cross-shaped cut in the center. We roll up a cone from the smallest circle and fasten it with glue. This will be the top of our Christmas tree. Take a cardboard cylinder and string a circle of the largest diameter onto it. We do the same with the remaining circles, in descending order of diameter. Cover the top with a small cone. We decorate the Christmas tree with multi-colored beads (they can be sewn or glued).
